Nostalgia Electrics KRS-2150 Regulator, English, Output Pressure, in tank. Pressure Relief Valve

REGULATOR

The Double Regulator works the CO2 Tank and measures PSI (pounds per square inch), as well as the volume of the CO2 gas in the Cylinder. Set Output Pressure Gauge between 8-12 PSI for a nice, frothy head.

ENGLISH

Output

Pressure

Gauge (0-60 PSI) for measuring PSI of CO2 outflow from Tank to Keg (8-12 PSI recommended).

Tank Pressure Gauge (0-3000 PSI) for measuring PSI of CO2

in tank. Pressure Relief Valve

1.Close the Shut Off Valve on the Double Regulator, and open the CO2 Tank Valve (#9) completely.

Screw adjusts the output pressure.

CO2 Shut Off Valve (shown in open position)

2.Unlock Screw using Allen Wrench (included). Slowly turn the Double Regulator adjustment screw until the desired pressure is shown on the Output Pressure Gauge (8-12 PSI). Turning clockwise will increase the output pressure, and turning counter-clockwise will decrease the output pressure.

3.Once desired pressure is reached, you may re-lock Screw using Allen Wrench.

4.Open the CO2 Shut Off Valve on the Double Regulator to allow gas flow from the Double Regulator to the Keg Coupler. You will hear the keg pressurizing. The output needle will drop momentarily until the pressure has equalized. Then the needle will return to the point you set it at.

5.The Keg Coupler is designed with a pressure relief valve (PRV). Pull the ring on the PRV briefly to allow gas to vent. This will permit gas to flow through the Double Regulator and help obtain a more accurate reading on the Output Pressure Gauge.

6.Re-check the output pressure on the Double Regulator, and if necessary re-adjust using step #2 until the desired pressure is shown. It is always wise to follow up any adjustment to the Double Regulator with a

brief pull of the PRV ring to ensure an accurate output reading.

8