ENGLISH
STEP 6 | STEP 7 |
The CO2 | Connect the |
Rubber | CO2 line from |
Directional | the Double |
Washer goes | Regulator |
back into the | to the Keg |
Keg Coupler. | Coupler. |
STEP 8 | STEP 9 |
Place the Tap Tower on the | Make sure the notches in the Tap |
KEGORATOR™ and feed the | Tower fit into the holes in the top of the |
hose line through the hole in the | KEGORATOR™. Tighten the Tap Tower |
top of the KEGORATOR™. | by twisting until it locks in place. |
STEP 10 | STEP 11 |
Place Coupler Washer (#3) | After the Tap Tower has been placed |
on top of the Keg Coupler. | on the KEGORATOR™ and the hose |
| line feeds through the bottom, attach |
| the wing nut to the Keg Coupler. |
11