ENGLISH
INSTALLING THE CASTERS
Follow the steps below to install the Casters.
1.Empty the inside of the cabinet
completely and lay the KEGORATOR™ down on it’s side. We recommend that you place a piece of cardboard or cloth underneath the cabinet
to prevent dents or scratches.
2.Place washers over Caster bolts, then insert the Casters into the holes on the bottom corners of the cabinet. Tighten each Caster
by turning the nut clockwise with a wrench (not provided in the kit).
3.Once all four Casters have been tightened, stand the cabinet in its upright position.
Note: Two of the Casters include locking mechanisms to ensure the unit does not slide on hard floors. These two locking Casters should be fastened at the front end of the unit, with the unlocked Casters fasted on the rear end.
INSTALLING THE GUARDRAIL
Follow the steps below to install the Guardrail.
1.Place the Guardrail on top of the KEGORATOR™.
2.Align all holes of the Guardrail with the holes on the top of the KEGORATOR™.
3.Secure the Guardrail to the KEGORATOR™ by placing inside corresponding rubber holes.
Handle
Beer
Dispenser
Tower
Beer Duct
Guard Rail
9