NovaJet PRO 600e
8Attach the clamp for the grounding strap to the right lower rear edge of the dryer assembly bracket and tighten the thumbscrew securely so that the paint is penetrated.
9Check to be sure that the media sensor is plugged in to the connector on the right stand leg. You can swing the sensor mounting bracket away from the printer if necessary when loading media.
10To load media, slide the media roll over the feed roller. If you will be using the takeup roller, mount an empty media core on the takeup roller before insert- ing the roller into the stand. Mount the two rollers as shown below. Insert the end of a roller into the space provided in the left roller support, then fit the other end of the roller into the right support. Make sure the gear on the roller is engaged with the gear on the support.
6 Quick Start
