DRIVER INSTALLATION - PC
Before you can begin using VirtualVinyl, you will need to install the necessary drivers onto your computer. The installation procedure is quick and easy – please follow the instructions below.
1.Connect the VirtualVinyl box to a USB2.0 compatible port on your computer, using the included USB2.0 cable. You will see the message on the right displayed on the bottom right corner of your screen.
2.The screen on the right will automatically pop up after a few seconds.
Please insert the VirtualVinyl installation CD into your computer’s
Make sure that “Install the software automatically” option is checked and click NEXT.
3.The Hardware Wizard will begin to look for the drivers. You will see the warning on the right appear on the screen.
Please click CONTINUE ANYWAY.
4.The Hardware Wizard will proceed with the installation. Once the drivers have finished installing, you will see the screen on the right appear. Click FINISH to complete the installation procedure.
Lastly, you will see the following message displayed in the bottom right corner of your screen:
DRIVER INSTALLATION - MAC
Under Mac OS X, VirtualVinyl is a Plug and Play device so there is no driver installation necessary. Simply connect the VirtualVinyl box to a USB2.0 compatible port with the included USB2.0 cable. The box will be ready for immediate use.
4
