NuTone IM-440 Series installation instructions MODEL IM-4406SERIES MASTER STATION, Master Station

AM/FM

RADIO/CD PLAYER INTERCOM SYSTEM

MODEL: IM-4406 SERIES MASTER STATION

INSTALLATION

INSTRUCTIONS

This booklet contains information for installing the master station. All system wiring and rough-in frames should be installed before mounting and wiring the master station.

Refer to the installation instructions packaged with the rough-in frames for detailed wiring information. For more detailed information on wiring and mounting other system components (i.e., speaker, remote control, etc.), refer to the installation instructions packaged with each separate component.

IM-4406 SERIES REPRESENTATIVE WIRING ILLUSTRATION

PUSHBUTTON	NUTONE CHIME		14/2 WITH GROUND						Use this diagram for reference only.
	TRANSFORMER
		120V 60HZ	(OBSERVE LOCAL CODES)						See IR-105 Rough-in frame instructions
		(CLASS 1)	120V 60HZ (CLASS 1)						for detailed wiring.
		(OBSERVE
		LOCAL CODE)						NUTONE
	143)-S								OUTSIDE
								IW-6		IW-2	OUTSIDE
					(2) 801T				REMOTE
		PUSHBUTTON FOR									SPEAKER
									CONTROL
	(NUTONE	OPTIONAL CHIME		TRANSFORMERS
		MODULE		SECONDARY:
					18V, 72VA
	18/2	INSIDE							INSIDE	IW-2	INSIDE
		ANTENNA							REMOTE
											SPEAKER
						EARTH			CONTROL
OPTIONAL		ATTIC				GROUND		IW-6
ELECTRONIC
								NUTONE			SPEAKERS
DOOR CHIME
											INSIDE
		300´ MAX					14 GA
200´ MAX		NUTONE IW-2							IW-6		W/CONTROLS
NUTONE
IW-2
									TRANSFORMER
										301T	120V 60HZ
					IM-4406						(CLASS 1)
											(OBSERVE
			MASTER STATION					100´ MAX S-143			LOCAL CODE)
14 GA
GROUND								100´ MAX S-143
		IW-2							OPTIONAL WIRING
						NUTONE			FOR DOOR		DR-1/DR-2
CABLES		VOLUME	NUTONE 2-IW				6-IW		RELEASE
											DOOR RELEASE
SHIELDED		MUSIC
AUDIO		DISTRIBUTION
		CONTROL						IA-6C			DESKTOP
	OPTIONAL	IW-2					5˝ PATIO	RECEPTACLE
			DOOR								FRAME WITH 5˝
	MUSIC					SPEAKER					REMOTE
	SOURCE		SPEAKER							IA-6
						W/CONTROLS
										PLUG

	MUSIC
	DISTRIBUTION		DOOR SPEAKER MODELS WITH CHIME
	SPEAKER
			PUSHBUTTON ALSO REQUIRE 18/2 (S-143)
120V. 60HZ (CLASS 1)
		300´ MAX	TO CHIME LOCATION OR IW-2 TO MASTER
(OBSERVE LOCAL CODE)			IF CHIME MODULE IS USED.