4.Test the operating range.
Place the chime and pushbutton in their desired locations and press the pushbutton. If the chime sounds, pro- ceed to step 5. If the chime does not sound, refer to the “Troubleshooting” section for help.
5.Install the chime.
Use the hardware (provided) to mount the chime on a wall. The chime can be mounted by using the holes in the back of the case or by using 2 screws with the keyholes. Snap the front of the chime case back on.
Keyholes
Close chime case from bottom
6. Install pushbutton. |
|
|
| |
Use the hardware (pro- |
|
|
| |
|
|
| ||
|
|
| ||
vided) to attach the back |
|
|
| |
plate of the pushbutton |
|
|
| |
to its mounting surface. | TOP | |||
Make sure the long tab is |
|
|
| |
at the bottom. | BACK |
|
|
|
| PLATE |
|
|
|
If mounting the pushbut- |
|
|
| |
ton to a metallic or con- |
|
|
| |
crete surface: Increase |
|
|
| |
the operating range by |
|
|
| |
using wood spacers be- |
|
|
| |
tween the back plate and |
|
|
| |
the mounting surface. |
|
|
| |
|
|
| ||
Snap the pushbutton |
| LONG TAB | ||
case onto the back plate. |
|
|
|
7. Check operation.
Depress pushbutton and listen for chime. If necessary, adjust volume using the control on the back of chime. If chime does not function properly, refer to “Troubleshooting” section.
| Chime |
| Volume |
| Control |
1 | 6 |
+ | - | + |
|
BATTERY REPLACEMENT
Chime
Open chime case. (see step 1) Replace batteries with three 1.5V alkaline, size “D” (R20) batteries. Close chime case.
Pushbutton
Open pushbutton case (see step
2). Replace battery with one 12V alkaline, type A23 (Model RCA23), or MN21 battery. Close pushbutton case.
ADDITIONAL DOOR
CHIMES
Additional wireless door chimes can be set to ring separately from or together with other wireless door chimes. Set the pushbutton and chime frequency codes accordingly. See page 3.