Nuvo Stereo System

2.2.2 Adding the NV-SCH1 or other Sirius Connect tuner

devices

NuVo offers a SIRIUS Satellite Radio receiver module, NV-SCH1,

produced by a third-party manufacturer for SIRIUS Radio use. This

module comes with a standard 8-pin cable that supplies both the

audio and metadata associated with satellite radio broadcast. One

module is required for each tuner that you want to enable with

SIRIUS capability. This is easily added to the Renovia System by

plugging the 8-pin cable into one or both of the SIRIUS inputs on the

Main Source Hub, as shown in Fig. 8. Once the SIRIUS receiver is

activated and receiving a signal, the Renovia Main Source Hub will

recognize SIRIUS as an additional band available through Sources 1

and 2.

Fig. 7

The NuVo active

antenna can be located up to

200 feet from the Main Source

Hub.

Your SIRIUS Tuners must be activated through SIRIUS. This

can be done online at www.SIRIUS.com.

Receiving the satellite radio signal depends on a satellite radio

antenna. NuVo's accessory NV-T2ANT-DK is the perfect solution. It is

designed to provide a signal for up to two NV-SCH1 modules, as

shown in Fig. 9.

These are easily used as sources by attaching the included NV-T2FAA

AM/FM antenna to the coaxial antenna connection using a standard

RG6 Coaxial cable, as shown in Fig. 7 If you are using a third-party

FM antenna for signal reception, you must turn off the voltage

provided by the Renovia System for AM reception. This is done from

the Advanced T2 Settings menu on the Control Pad.

Fig. 8

Fig. 9

NV-T2SXA SIRIUS/XM outdoor

antenna.

OUT1 OUT2

MODEL: NV-T2SS2

SATELLITE SPLITTER, 2 WAY

NV-SCH1 SIRIUS Tuner is not

included in the NV-T2ANT-DK

package.