Nuvo Stereo System

7.4 Renovia Tuner Control

Control of Renovia’s internal tuners (sources 1 and 2) default to the

buttons of the Control Pads, unless those sources are overridden in the

Configurator software. These functions are consistent with the NV-

E6GCP, NV-I8GCP, and NV-WCP Control Pads. The NV-CTP36 Color Touch

Pad has a specialized screen for the tuner control, although, the basic

functionality is the same (see the NV-CTP36 User Guide).

Tuning Up and Down

Tuning at the NuVo Control Pad is accomplished by touching arrow

forward >> or arrow back <<. A single touch advances one channel

or station frequency based on the tuning method selected, and a touch

and hold will rapidly change the channel or frequency, as shown in Fig.

49.

Pressing and holding the Play/Pause Button will toggle between

Preset and Seek Tune. The display will show an((S)) for Seek Tune and a

((P)) if in Preset Tune. If the band setting is AM or FM, the display will

also indicate signal strength for the selected frequency, as shown in

Fig. 50.

Changing Bands

Touching the Play/Pause button on the Control Pad will also toggle

through the available bands. SIRIUS is only available if an activated

NV-SCH1 SiriusConnect tuner is plugged into the SIRIUS inputs 1 and 2

on the NV-RVM.

Selecting a Locked Channel (North American SIRIUS only)

If a locked channel is selected, a four-digit security code must be

entered to listen to the audio. The code will appear as 0000 on the

display with the first 0 highlighted. The up and down arrow buttons

are used to scroll to the desired number and touching the OK button

advances the highlight to the next 0. Repeat the steps to enter the

remaining numbers until all four are entered. Touching the OK button

will then allow access to the selected channel, as shown in Fig. 51.

Jozef Kossovit

SIR

SR 86 (P101)

SIRIUS Pops

3:09 PM

Hungaria

Tuning Up and Down

SIR Locked

0000

3:15 PM

Fly 92.9

SST

FM 92.9 3:15 PM

Change Tuner Bands and Tuning Mode

Fig. 49

Fig. 50

Fig. 51