42
8.5 Zone Settings: This selection contains several zone specific
controls, as shown in Fig. 72. Note that Advanced is grayed out and is
preceded by an asterisk. To access these menu items, hold the OK
button for six seconds.
Zone Settings
Balance
Bass
Treble
Loudness Comp.
Volume Settings
Display Settings
*Advanced
Fig. 72
Setup: The Setup menu is for specific system setup. It consists of
several subset menus, Fig. 70. These are defined in the next
section.
Fig. 70
Setup
Favorites #1-12
Zone Settings
System Settings
*Source Settings
Favorites #1-12: Twelve global favorites can be defined for easy
access from within the Main Menu or from the twelve numeric
favorites accessible through the optional NV-GRC1 remote control.
Any favorites, which include play lists, tuner presets and specific disc
selections can be selected in the Favorites setup and automatically
added to the global list. The optional NV-GRC1 Remote Control has a
12-button numeric Control Pad that provides direct access to the 12
assigned favorites. When a favorite is selected, the zone will
automatically go to the appropriate source and music selection, as
shown in Fig. 71.
Favorites #1-12
Rock
Jazz
Sports Talk
(Empty)
(Empty)
(Empty)
(Empty)
Fig. 71
Balance: This controls the level of audio going to the left and right
speakers. In some cases, when the listening area is not absolutely
centered between the speakers, it is useful to adjust the center
listening point left or right. This menu option gives the ability to
adjust the sound left or right up to 18 steps in either direction.
Bass: This adjusts the frequency level from 100Hz and below. The
default is flat, and the range is –18dB to +18dB.
Treble: This adjustment works within the same parameters as the
bass and adjusts the frequency level from 10kHz and up.
Loudness Compensation: Loudness can be simply turned on or
off by pressing the OK button.
Volume Settings: There are several default settings available in
this menu. Volume Reset is turned on or off by pressing the OK
button and controls whether the zone turns on at its previous
volume level, or to a preset level, as shown in Fig. 73. If checked, the
volume at zone on reverts to the level set in the next menu item,
Initial Volume. Choosing to set at the current listening level, or
selecting the default –60 dB level, controls this level. Maximum
Volume is an overall zone volume limit and is set in the same
manner as Initial Volume. Page Volume controls the level at which a
page is amplified in each zone, and Party Volume sets the initial
volume level when the party or all-on function is initiated.