What to do when you have problems with the sending of print jobs
Important points for the sending of print jobs
Before you send print jobs to the Océ TCS400, remember the following.
■The values defined in the Océ Settings Editor are default values for the system. You can define a number of job settings in the printer drivers or the job submission tools. The settings defined in the printer drivers or the job submission tools always overrule the settings defined in the Océ Settings Editor.
Chapter 10 of the user manual and the
■Make sure that the media type and size defined in your job match the media type and size defined on the printer.
■Make sure that you define the correct print mode for your job.
■Make sure that you define the correct media type for your job.
■Make sure that you define the correct job settings. For example, orientation, rotate, shift, and 'Automatic roll switch'. The section about the correct media types for your jobs describes the job settings you can use with the different media types and sizes.
A job submission tool like Océ Print Exec® Workgroup, provides you with information about the media defined on the system. The printer drivers do not give this type of information. When you use the printer drivers to send your jobs, use Océ Remote Logic to view information about the media defined on the printer in the Océ System Control Panel.
Chapter 4 of the user manual includes more information about how to send print jobs to the Océ TCS400.
Chapter 6 includes more information about how to define the correct media settings for your jobs.
Self support tips (GB) | 15 |
