English
User’sGuide 7
Printer menus
It is possible, using the front panel buttons,to change
thedefault configuration of the printer to accommodate
softwareapplication, specific paper size, method of pa-
per feed and interface connection. The menu structure
consists of three levels:

Category

Each category consists of several items, selected by
pressing the MENU 1/Menu 2 button (with the printer
off-line). When the required category is displayed,
press the ENTER button to display a list of items.

Item

Each item consists of several parameters displayed on
the upper line in the LCD by pressing the MENU 1/
Menu2 button.

Parameter

Theparameter will be displayed on the lower line of the
LCDbypressingtheW
WW
W/Recover and X
XX
X/Reset buttons.
When the required parameter is displayed, press the
ENTER button.

Viewing and modifying menu settings

Note: If software can control a feature that is also
controlled in the printer menu, the software
overrides the menu setting. Use software to
controlprinter features whenever possible.
1. Press ON LINE to place the printer off-line to
enterMenu1orMenu2asrequired.
2. Menu 1 is selected by momentarily pressing and
releasing the MENU 1/Menu2 button. Menu 2 is
selected by holding down the MENU 1/Menu 2
buttonforatleasttwoseconds.
3. Oncethe first menu category is displayed, further
presses of the MENU1/Menu 2 bu tton move on
tot he nextcategory.
4. Toente r ac ategory and display an item, press the
ENTER button. The LCD shows the item in the
top line and the current parameter in the bottom
line.