Printer maintenance

Maintenance menu

This menu is used for printer maintenance and setting some operating functions. To enter the maintenance menu:

1.Turn off the printer.

2.Press and hold MENU 1/Menu 2 and turn the printer on. USER MNT displays.

3.Press MENU 1/Menu 2 repeatedly to advance to the category required.

4.Press ENTER to start a function. Press X/Reset button to see other options, then press ENTER to select the option required.

5.Press ON LINE to exit.

The following table gives the different functions of the maintenance menu:

Function

Description

 

 

MENU RESET

Reset Level 1 menu to factory settings.

 

 

HEX DUMP

Print a hexadecimal dump of received data for

diagnostics. To exit, turn off the printer.

 

 

 

DRUM CNT

Reset the drum counter after replacing the image

RESET

drum cartridge.

 

 

Function

 

 

Description

 

 

 

 

 

DISABLE

=

Disables all control panel buttons

OP MENU

except ON LINE.

 

ENABLE

=

All buttons are active.

 

 

REC BUFF

Auto, 8KB, 20KB, 50KB, 100KB. (Default = Auto.)

 

 

 

Adjust horizontal print position in 0.25 mm

X ADJUST

increments. Plus (+) indicates right movement, minus

 

(-) indicates left movement.

 

 

 

Adjust vertical print position in 0.25 mm increments.

Y ADJUST

Plus (+) indicated downward movement, minus (-)

 

indicates upward movement.

 

 

2ND TRAY

1…16. (2nd paper tray address. Default = 5.)

 

 

 

 

Generating a cleaning page

If the printer shows signs of fading, streaking or erratic marks, the problem may be cleared by generating a drum cleaning page as follows.

1.Press the ON-LINE button to take the printer off line.

2.Hold down the W/Recover and X/Reset buttons together for at least two seconds. The LCD shows C L E A N I N G a n d M A N UA L A 4 S I Z E REQUEST.

24

OKIPAGE 14ex, 14i, 14i/n

Page 28
Image 28
Oki 14ex, 14i/n manual Printer maintenance, Maintenance menu, Generating a cleaning