English
Level 2 menu settings
Category | Item |
| Parameter | Explanation | |
|
|
|
|
| |
Print Mode | Mode | 600 | V1200 (600 x 1200) | Printing resolution setting in dots per inch (dpi). | |
|
| 300 |
|
| |
| Autocont | Off | On | The printer can recover from a memory overflow or print overrun automatically after about | |
| 15 seconds if set to ON, otherwise Recover key has to be pressed. | ||||
|
|
|
| ||
|
|
|
|
| |
|
| Off | On | Most computer software will send a form feed character at the end of the print job so that | |
Auto Operation | Wait Time | 5 sec | 6 sec | the last page is ejected. If it does not, the printer can automatically eject the last page after a | |
|
| 90 sec | 300 sec | period of inactivity. | |
|
|
|
|
| |
| Man Time | 60 sec | Off | This setting applies to Adobe PostScript operation only. It determines how long the printer | |
| 30 sec |
| will wait for a sheet to be inserted in the manual paper feeder. | ||
|
|
| |||
|
|
|
|
| |
Darkness |
|
|
| Adjusts internal settings to compensate for variations in humidity. In environments of high | |
Darkness | 0; +1; +2; | temperature and humidity if some feint printing occurs, increase setting. In environments of | |||
Control | |||||
|
|
| low temperature and humidity if black or white spots appear, decrease setting. | ||
|
|
|
| ||
|
|
|
|
| |
Power Saving | Power | 0 sec | 8 min | When this function is active, power to the fuser is turned off to conserve energy. A slightly | |
Saving | Disable |
| longer delay will occur before the next job prints, to allow the fuser to warm up again. | ||
|
| ||||
|
|
|
|
| |
Low Toner | Low Tnr | On | Off | This setting determines whether the printer will remain | |
when the toner cartridge has only enough toner left for about 100 pages. | |||||
|
|
|
| ||
|
|
|
|
| |
Toner Saving | Toner | Disable | Medium |
| |
Light |
|
| |||
|
|
|
| ||
|
|
|
|
| |
|
|
|
| Many messages which may appear from time to time can be cleared by pressing the Recover | |
Clearable | Clr Wrng | On | Job | key if this function is ON. If it is set to JOB, the host computer may be able to clear such | |
Warnings | warnings by downloaded commands. This setting is not relevant when using PostScript | ||||
|
|
| |||
|
|
|
| emulation. | |
|
|
|
|
| |
Error Report | Erreport | Off | On | In PostScript mode this setting determines whether an error report will be printed when an | |
error has occurred. | |||||
|
|
|
| ||
|
|
|
|
| |
| Speed | High | Medium | Most modern PCs can download data at very high speed. If data corruption is experienced | |
| on printed pages, reduce the setting to MEDIUM. | ||||
Parrallel I/F |
|
|
| ||
|
|
|
| ||
Enable | Disable | The printer can send status information back to the computer. A printer interface cable | |||
| |||||
| compliant with IEEE1284 is needed to use this feature. | ||||
|
|
|
| ||
|
|
|
|
| |
User’s Guide | 11 |
