Installing paper
1.Remove the paper tray from the bottom of the printer and place plain paper in the tray, keeping the level of the paper in the tray below the guide marks (1).
2.Adjust the rear paper support (2) to the size of paper being used by lifting up and sliding for- wards or backwards as necessary.
3.Adjust the paper guides (3).
4.Replace the tray in the printer. The paper level indicator (4) provides a visual indication of how much paper is left in the tray.
Printing envelopes
1.Pull out the rear exit extender (1) until it locks and lift out the support bar.
English
2.Pull down the manual feed tray (2) and adjust the paper guides to the width of the envelope.
3.Insert the envelope, flap down and to the left, until the printer grips it.
4.Set envelope size and landscape orientation in software being used, then issue the print com- mand.
Print quality adjustments
The process used to fuse (fix) the printed image to the paper involves a mixture of pressure and heat. Too much heat will cause lightweight paper to crease or curl and corrugations in transparencies. Too little heat will cause the image not to fuse fully into heavyweight pa- per.
User’s Guide | 15 |
