REPLACING THE BELT UNIT
The belt unit is located under the four image drums. This unit requires replacement approximately every 50,000 pages.
Switch off the printer and allow the fuser to cool for about 10 minutes before opening the cover.
1.Press the cover release and open the printer’s top cover fully.
WARNING!
If the printer has been powered on, the fuser will be hot. This area is clearly labelled. Do not touch.
2.Note the positions of the four cartridges. It is essential that they go back in the same order
1
2
3
4
1. Cyan cartridge | 2. Magenta cartridge |
3. Yellow cartridge | 4. Black cartridge |
