Maintenance Menu
For performing printer maintenance functions.
You'll use this menu primarily to Enable/Disable the Power Save Mode or to reset the printer
menu to the defaults.
Defaults are red bold print.
Item (see descriptions below) Values/Meaning
EEPROM RESET EXECUTE
POWER SAVE ENABLE, DISABLE
PAPER BLACK SETTING 0, +1, +2, -2, -1
PAPER COLOR SETTING 0, +1, +2, -2, -1
TRANSPR BLACK SETTING 0, +1, +2, -2, -1
TRANSPR COLOR SETTING 0, +1, +2, -2, -1

EEPROM Reset

Use this to reset the printer's menu to the factory defaults.

Power Save

With Power Save engaged (the printer's default), the printer waits the preselected interval (60
minutes is the printer's default) before going into the standby state. This saves energy, but if the
printer is in the power save state when you send a print job or try to go into the printer menu,
you have to wait for the printer to warm up before you can proceed.
You can use the Power Save setting in the Maintenance Menu to disable the power save mode.
For information on changing the Power Save Interval, see "Setting the Power Save Interval."

Paper Black Setting

Used to compensate for deterioration in the black print quality resulting from temperature and
humidity differences:
Select -1 or -2 if light specks or streaks appear in the black printing.
Select +1 or +2 if the black printing appears faded.

Paper Color Setting

119