Oki 9400 Proof & Print: Windows Me PostScript Driver

Note: If Job Type is grayed out, click Device options and click Printer hard disk, then
click OK.
5. Under Job name setting, enter a Job name having up to 16 characters.
6. Enter the four-digit password (PIN) assigned to you by your network administrator, or
create one using any combination of numeric characters 0 through 7 (8 and 9 cannot be
used).
7. Click OK twice and print the document.
Proof & Print: Windows Me PostScript Driver
To print a proof using the Windows Me PostScript driver:
1. Open the document in the application.
2. Click File → Print.
The Print dialog box appears.
3. Make sure the OKI C9200 or C9400 PostScript printer is selected and the application's
collate feature is turned off, then click Properties (or your application's equivalent).
The OKI Properties dialog box appears.
4. On the Paper tab, under Copies:
a. Select the number of copies you wish to print.
b. If applicable, click Collate.
c. Select Proof and print as the Job type.
The JOB PIN dialog box appears.
228