Oki 9400 Confidential Documents: Windows NT 4.0 PostScript Driver , Printing the Confidential Document

Confidential Documents: Windows NT 4.0 PostScript Driver
To send a confidential document to the printer using the Windows NT 4.0 PostScript driver:
1. Open the document in the application.
2. Click File → Print.
The Print dialog box appears.
3. Make sure the OKI C9200 or C9400 PostScript printer is selected, then click Properties
(or your application's equivalent).
The OKI Properties dialog box appears.
4. Under Paper/Output:
a. Click Copy Count and select the number of copies you wish to print.
b. If applicable, click Collate. and select Yes under Change 'Collate' Setting.
Note: If Job Type is grayed out, click Start → Settings → Printers; right-click the printer
icon, then click Properties. Click the Device Settings tab, then scroll down to Installable
Options. Click Hard Disk and select Installed, then click OK and close the Printers
dialog box.
c. Click Job Type and select Secure print under Change 'Job Type' Setting.
The JOB PIN dialog box appears.
5. Under Job Name Setting, enter a Job Name having up to 16 characters.
6. Enter the four-digit password (PIN) assigned to you by your network administrator, or
create one using any combination of numeric characters 0 through 7 (8 and 9 cannot be
used).
7. Click OK twice and print the document.
The document processes and downloads to the printer.
Printing the Confidential Document
245