7. Lower the printer onto the auxiliary tray(s), aligning the printer with the tray and lowering
the holes/plug in the bottom of the printer onto the pins/socket on the tray.
8. Reattach the interface cable.
9. Open the cover and reinstall the fuser and drums/toners, then reinstall the paper tray.
10. Plug the power cord in and turn the printer on.
Step 2: Load Print Media
1. Pull the auxiliary paper tray out.
2. If necessary, lift out the media indicator at the right end of the tray and reposition it to
correspond with the media you will normally use in that tray.
3. Position the paper guides in the tray.
403