Sets the time the printer will wait for paper to be installed after it displays a request for paper,
before it cancels the print job.

WAIT TIMEOUT

Sets the length of time the printer waits for additional data to be received.
PCL Mode
If the amount of time selected passes before the printer receives additional data, the
printer will print any data it has in the buffer and reset.
PostScript Mode
If the amount of time selected passes before the printer receives additional data, the
printer will cancel the print job immediately and reset without any further printing.

LOW TONER

Normally when this message is displayed, the printer will remain on line and continue printing
until it runs out of toner.
Change the setting to STOP if you wish the printer to stop printing and go off line when this
message displays.

JAM RECOVERY

Determines what happens to the print job after a paper exit jam is cleared.
Normally, the printer will automatically resume the print job.
If you change the setting to OFF, the printer won't reprint the jammed pages.

ERROR REPORT

If you wish the printer to automatically generate and print an error report when an internal error
occurs, change the setting to ON.

LANGUAGE

Sets the printer's display language.
Usage Menu
Provides information on counts for various printer parameters.
138