# /usr/sbin/lpadmin -p PRINTER_lp -I postscript

d.Start the print scheduler.

# /usr/sbin/lpsched

e.Activate the print queue.

# /usr/sbin/accept PRINTER_lp

f.Enable the print queue

# /bin/enable PRINTER_lp

To customize output, for example to add additional commands at the start of each print job, you can edit a copy of the netstandard model file then add it using the lpadmin command

Example: for printer PRINTER_lp, with model file called PRINTER0_model

#/usr/sbin/lpshut

#/usr/sbin/lpadmin –p PRINTER_lp –m PRINTER_model

#/usr/sbin/lpsched

HP-UX 10.x configuration

If an incorrect IP Address, Subnet Mask or Gateway is entered, the network may go down or other damage may occur. Check the address with the network manager.

The following example uses HP-UX10.20 and an OKI printer as examples. The absolute path and method of configuring commands may differ in other versions of the OS. Refer to the workstation manual for more details.

1.Confirm that the IP address of the printer has been set. See network interface card IP address configuration for more information.

OkiLAN 8300e Network User’s Guide

UNIX - 108