IP Address Setup

If you only use TCP/IP and the OkiLAN has not yet been configured, occasionally it may not be displayed on AdminManager. You can configure the IP address of the OkiLAN by this function.

1.Select [IP Address Setup] from the [Setup] menu.

2.Set [Ethernet Address] and [IP Address] and select [OK].

>The Ethernet Address (MAC address) is displayed during the self-diagnostic test.

3.AdminManager asks whether you want to initialize the network interface card or not. Select [Yes]. Even if you select [No] here, the IP address that you set can be used after turning the printer OFF and ON. The requirement to turn your printer OFF and ON is dependent on the network interface card.

C6100 Series Network User’s Guide

Configuration - 39