Printing Utility

OKI LPR

The OKI LPR Utility is a utility that allows printing data to printers connected to the network via TCP/IP. This utility is for use with Windows XP, Windows 2000, Windows Me, Windows 98, Windows 95 and Window NT4.0.

The utility is for those OKI printers which support TCP/IP; it redirects printing data to the lpr port of the specified IP address.

System Requirement

Windows XP/2000/Me/98/95/NT4.0 with TCP/IP support.

To install the OKI LPR utility

The OKI LPR utility requires that the TCP/IP protocol should be installed in your Windows system. To install the TCP/IP protocol into your Windows system consult your Windows manual.

Windows XP/2000/NT4.0 requires administrator privileges.

1.Set up the printer driver by designating the output destination to [Local Printer (LPT1:)]. For information on setting up your printer driver, see the printer user manual.

2.Insert the CD-ROM provided with your printer into the CD-ROM drive.

If the Menu Installer doesn’t start automatically, click Start→Run→Browse. Browse to your CD-ROM. Click Setup→Open→OK.

3.Select [Optional Utilities].

4.Select [Install Direct Network Printing Utility (LPR)]

5.Click [Next] when the [Welcome] screen is displayed.

C6100 Series Network User’s Guide

Configuration - 72