Oki C6100dn manual 55

Ref. No.	Admin	Web browser	TELNET/	Available	Notes
	Manager		Diagnostic	options
			test print
NetBEUI-1	[OKI Device	[Network	[Setup	ENABLE/	Set
	Setup]-[Net	Configuration]-[	NetBEUI]-[Net	DISABLE	NetBEUI,
	BEUI]-[Use	General	BEUI protocol]		enabled or
	NetBEUI	Settings]-[Protoc			disabled.
	Protocol]	ol
		Options]-[NetBE
		UI]
NetBEUI-2	[OKI Device	[Network	[Setup	Any	Set a
	Setup]-[Net	Configuration]-[	NetBEUI]-[Co	alphanumeric	computer
	BEUI]-[Com	NetBEUI]-[NetBE	mputer name]	characters up to	name for
	puter	UI]-[Computer		15 characters.	OkiLAN.
	Name]	Name]		(Default is [OL]
				+ last six
				digits of MAC
				address)
NetBEUI-3	[OKI Device	[Network	[Setup	Any	Set a work-
	Setup]-[Net	Configuration]-[	NetBEUI]-[Wo	alphanumeric	group name
	BEUI]-[Wor	NetBEUI]-[NetBE	rkgroup name]	characters up to	to which
	kgroup]	UI]-[Workgroup		15 characters.	OkiLAN
		Name]		(Default is	belongs.
				[PrintServer])
NetBEUI-4	[OKI Device	[Network	[Setup	Any	Set the
	Setup]-[Net	Configuration]-[	NetBEUI]-[Co	alphanumeric	comments
	BEUI]-[Com	NetBEUI]-[NetBE	mment]	characters up to	for OkiLAN.
	ment]	UI]-[Comment]		48 characters.
				(Default is
				[EthernetBoar
				d OkiLAN])
Port-1	[OKI Device	[Network	[Setup printer	Any	Set
	Setup]-[Net	Configuration]-[	port]-[NetWar	alphanumeric	NetWare
	Ware]-[Print	NetWare]-[NetW	e port name]	characters up to	printer
	er Name]	are		31 characters.	object
		Selections]-[Net		(Default is [OL]	name
		Ware Printer		+ last six
		Name]		digits of MAC
				address +
				-prn1])
Port-2	[OKI Device	[Network	[Setup printer	Any	Set
	Setup]-[Eth	Configuration]-[E	port]-[EtherTal	alphanumeric	EtherTalk
	erTalk]-[Prin	therTalk]-[EtherT	k port name]	characters up to	printer
	ter Name]	alk Printer		32 characters.	object
		Name]		(Default is the	name
				printer name
				on which
				OkiLAN is
				installed)

C6100 Series Network User’s Guide

Configuration - 55