Using Quick Setup
Quick Setup utility allows you to configure the print server easily and simply without installing any software packages.
You can configure the following:
>Enable/disable TCP/IP, NetWare, EtherTalk, NetBEUI protocols.
>Set IP address, Subnet Mask and Gateway for TCP/IP manually or by using DHCP.
>Set NetWare mode and create Queue/Print Server/Printer objects.
>Zone name and Port name for EtherTalk.
Configuration requires a PC with Windows 95/98/Me, Windows 2000 Advanced Server/Professional or Windows NT Server 4.0/
This utility can only be used on a PC that can be connected to the network with TCP/IP or IPX/ SPX.
This utility must be used on a PC that is located in the same segment as the printer. To create a NetWare queue, NetWare Client 32 or IntranetWare Client should be installed in your system.
The following explanation uses Windows 98 as an example.
1.Insert the
If the Menu Installer does not start automatically, click Start→Run→Browse. Browse to your
C6100 Series Network User’s Guide
Configuration - 12