Packaging for return to a Service Centre
With the original box and packaging:
Pack the printer in the original box using the original packing material by reversing the instructions in “Unpacking the printer” in your Setup Guide.
Note: Please do not ship the Power Cable, Printer Cable, Printer Driver Disks, User Guide, Print Head, Storage Box or Ink Cartridges unless instructed to do so.
Without the original box and packaging
Outside box - 275 lb test box
|
|
|
|
|
|
| Printer |
|
|
| Two layers 12.3mm (0.5")(0.5") |
|
|
|
| ||
|
|
|
| bubble wrap | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Minimum 50.8mm (2") (2") loose fill
1.Remove the Print Head and place it in the Print Head Storage Box. Do not return the Print Head.
2.Close Carriage Cover and Paper Tray. Remove Power Cable and disconnect the printer cable.
Note: Please do not ship the Power Cable, Printer Cable, Printer Driver Disks, User Guide or Ink Cartridges unless instructed to do so.
3.Place the printer in a large plastic bag.
4.Completely wrap the printer in 2 layers of bubble wrap (minimum 12.3mm (0.5")) thick and tape the bubble wrap to keep it in place.
5.Select a corrugated box large enough to allow at least 50.8mm (2") between the
Note: The strength of the box should be 275 lb test.
6.Fill the bottom of the box with 76 mm (2 to 3") of loose fill.
7.Place the
English
User’s Guide | 29 |
