2Lift out the support bar.
3Insert the label sheet with
Guidelines for Transparencies and Labels
•Always use manual feed.
•Always use rear output when printing transparencies and adhesive labels.
•Should be specifically made for laser printers or photocopiers.
•Must be able to withstand heat of 200° C for 0.1 second.
•Labels should cover the entire carrier
•Use rear paper output − to reduce heat exposure and curling.
Using Recycled Print Media
Recycled paper should be restricted to 20% to 35% Post Consumer Content and not exceed 50%. Paper must be relatively stiff and have minimum edge curl. Paper should be white and bright for maximum contrast. The surface should be smooth, clean, and stable electrically and dimensionally.
