Troubleshooting

Pictures you have already taken do not appear on the monitor.

Possible cause

Corrective action

 

 

Ref. Page

 

The power is off.

Close the lens barrier, then press

to turn the

p.17, 61

 

 

monitor on.

 

 

 

 

 

 

 

 

 

The camera is in the

Press

quickly twice, or close the lens barrier

p.61

 

shooting mode.

and then press

to switch to the playback

 

 

 

mode.

 

 

 

 

 

 

 

 

 

There are no pictures

NO PICTURE appears on the monitor.

–

 

on the card.

Record pictures.

 

 

 

 

There is a problem with

Refer to the “Error codes”.

 

p.96

 

the card.

 

 

 

 

 

 

 

 

 

 

The camera is

The monitor does not function when the Video

p.66

 

connected to a TV.

cable is connected to the camera.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The date/time recorded with the image data is wrong.

 

 

 

Possible cause

Corrective action

 

 

Ref. Page

 

The date/time is not

Set the date/time. The clock adjustment is not

p.20

 

set.

factory-preset.

 

 

 

 

 

 

 

 

The batteries are

When the batteries run out, the date/time setting

p.11, 20

 

exhausted.

is canceled. Replace the batteries with new ones

 

 

 

and set the date/time again.

 

 

 

 

 

 

 

The camera has been

If the camera is left for several hours with the

p.11, 20

 

left with the batteries

batteries removed, the date/time setting is

 

 

removed.

canceled. Set the date/time again.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Erasure, protection, print reservation and card formatting cannot be performed

 

Possible cause

Corrective action

 

 

Ref. Page

 

A write-protect seal is

Remove the seal before using the card. Do not

p.14

 

attached to the card.

reuse the write-protect seal.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The settings performed are returned to the factory default settings.

 

 

 

 

 

 

 

 

Possible cause

Corrective action

 

 

Ref. Page

 

All Reset was set to

Set All Reset in the mode menu to OFF.

p.85

 

ON.

 

 

 

 

 

 

Troubleshooting

100