Varying the image brightness (Exposure compensation)
5
6
Press 
to select the exposure compensation value.
Select a [ + ] value to brighten the image or a [ - ] value to darken the image.
The exposure compensation value is set.
To close the menu, press 
twice.
Take the picture.
SEt CARD PIC CAMERA
+1.5 DIGItAL ZOOM
MEtERING
shooting Advanced
•The exposure compensation value returns to ±0 (factory default setting) when the lens barrier is closed. “Saving the settings (All
Reset)” (
p.85)
•When you adjust the exposure while observing the subject on the monitor, the brightness of the image displayed also changes. However, the variation may be less noticeable when the subject is dark. In this case, play back the recorded picture to confirm that the exposure is satisfactory.
•If the flash is used, the image brightness (exposure) may differ from the intended brightness (exposure).
•Exposure compensation cannot correct the image if the surroundings of the subject are extremely bright or dark.
48