Using the flash

basics Shooting

In the auto-flash mode (factory default setting), the flash is designed to fire automatically when shooting under low light or against strong backlight, but you can change the flash mode to suit different shooting situations. Select the flash mode best suited to the light conditions and the effect you want to achieve.

1 Open the lens barrier.

The camera turns on in the shooting mode.

2 Press .

The current flash setting is displayed.

 

 

 

 

 

 

 

AUtO

 

 

 

 

 

 

 

16

3

Press

while the current flash

 

setting is displayed.

 

 

 

Each time you press

 

, the flash mode is

 

switched in the following sequence:

 

AUTO -

-

-

-

-

 

 

 

.

 

 

 

16

4

Take the picture.

 

 

 

 

•

The flash working range is approximately 2.5 m/8.2 ft.

 

•

The camera returns to the auto-flash mode (factory default setting)

 

 

when the lens barrier is closed.“Saving the settings (All Reset)”

 

 

(

 

p.85)

 

 

 

42