Troubleshooting
The picture has obscured edge(s).
Possible cause | Corrective action | Ref. Page |
The lens was partly | Hold the camera correctly, keeping your fingers | p.29 |
blocked by a finger or | and the strap away from the lens. |
|
the strap. |
|
|
|
|
|
The subject was too | Check the actual picture area on the monitor | p.31 |
close. | before taking the picture. |
|
|
|
|
The lens was dirty. | Clean the lens. Remove dust with a | – |
| commercially available lens blower and wipe |
|
| gently with a commercially available lens |
|
| cleaner. If the lens is left dirty, mold may form. |
|
|
|
|
|
|
|
The picture is out of focus. |
| |
Possible cause | Corrective action | Ref. Page |
The camera moved | Hold the camera correctly and press the shutter | p.29 |
when the shutter button | button gently. |
|
was pressed. |
|
|
|
|
|
The subject was | When using the macro mode, make sure the | p.40 |
outside the shooting | subject is within the shooting range. To cancel |
|
range when macro | the macro mode, close the lens barrier, then |
|
mode was set. | open it again. |
|
|
|
|
The shutter button was | Press the shutter button while looking into the | p.40 |
pressed while standing | viewfinder, not while standing in front of the |
|
in front of the camera in | camera. |
|
the |
|
|
The flash was set to the | Camera shake occurs easily with slower shutter | p.42 |
flash off mode in a | speeds. Use a tripod, or hold the camera firmly. |
|
lighting condition |
|
|
requiring use of the |
|
|
flash. |
|
|
|
|
|
The camera was set to | If you do not want to shoot in the | p.60 |
the | mode, cancel the |
|
|
|
|
Troubleshooting
102