EN 16
En
3. Installing the digital camera

Check the digital camera

Check the digital camera before loading it in the Case.

Battery Confirmation

Underwater shooting can reduce battery life because the picture has to be checked on the LCD monitor
before and after shooting. Make sure that you have sufficient remaining battery capacity before use.

Check the remaining number of pictures

Check that the image storage medium has enough room for the number of pictures you want to take.

Remove the strap and lens cap from the camera.

Be sure that the strap, and/or lens cap are not attached to the digital camera. If any of these items are
attached, be sure to remove them.
CAUTION:
In order to avoid missing photo opportunities due to an exhausted battery, yo u should always have a fully
charged battery before each dive.
CAUTION:
• If the digital camera is loaded without re moving the strap and lens cap, the Case cannot be sealed prop erly
and may leak.
• Handle the digital camera carefully when removing the strap and lens cap. Olympus does not assume any
liability for damage incurred if the camera is dropped.

Remove the eyecup from the digital

camera.

The Case allows you compose your shots in the
pickup viewfinder or the LCD monitor.
To improve the view of the pickup viewfinder,
remove the camera’s eyecup before loading it in the
Case.
The eyecup removed from the camera can be
stored in the camera table.
For details, see “How to attach the camera table to
the digital camera” (P. 19) of this manual.
CAUTION:
In case the digital camera is loaded in the Case without removing the eyecup and the rear lid of the Case is
closed, the pickup viewfinder pops out.
Remove the eyecup, then push in the pickup viewfinder.
PT-E05_EN.Book Page 16 Tuesday, June 17, 2008 11:11 AM