EN 31

En
Wash the Case with pure water
After use, seal the Case again after taking out the camera and wash it suf fic ient ly in pure wate r a s s oon
as possible.
After use in sea water, it is effective to immerse it for a few minutes in pure water to remove any salt.
Dry the Case
After washing with pure water, use a lint-free soft cloth without any salt on it to wipe off any waterdrop
and dry the Case completely at a well ventilated location in the shade.
CAUTION:
Water leakage may be caused when a high water pressure is applied locally. Before washing the Case with
water, remove the digital camera from it.
Operate the shutter lever and various buttons of this product in pure water to remove salt adhering to the
shaft. Do not disassemble for cleaning.
Letting salt dry on the case may impair the function. Always wash off any salt after use.
CAUTION:
Do not use hot air from a hair drier or the like for drying and do not e xpose the Case to direct sunlight, as this
may accelerate deterioration and deformation of the Case and deteriorati on of the O-ring, leading to leakage
of water.
When wiping the Case, take care not to cause scratches.
PT-E05_EN.Book Page 31 Tuesday, June 17, 2008 11:11 AM