EN 26

En
Check the operation of the loaded camera
After sealing the Case, check that the camera functions normally.
• Operate the power switch lever on the Case and confirm that the camera can be turned ON/OFF.
• Turn the mode dial knob on the Case and confirm that the camera mode switches properly.
• Operate the shutter lever on the Case and confirm that the camera shutter is released.
• Operate the zoom dial on the Case and confirm that the camera’s lens is controlled.
• Operate other control buttons on the Case and confirm that the camera functi ons p roperly as intend ed.
Perform the final checks

Visual Inspection

After closing the case tightly, check the seal between the front and rear l ids a nd th e connect ion be tween
the port and case to make sure the O-rings are not twisted, th at they sit p roperly in t he groov es, an d that
no foreign matter has been caught between the two parts.
CAUTION:
• If the camera does not function properly, remove the cam era and reload it, starting from “Check the digital
camera”(P. 16) of this manual.
• After loading the camera in the Case, confirm that the Case’s mode dial can be r otated.
If not, the Case’s mode dial may not be positioned properly on the camera’s mode dial. Set the mo de dials
properly.
CAUTION:
Hair, fiber, and other narrow items are not very apparent, but they may cause entry of water, therefore special
attention is required.
PT-E05_EN.Book Page 26 Tuesday, June 17, 2008 11:11 AM