Olympus X-Press V Multiple balloon sizing, Triple-lumen design allows for, Easier cannulation

Triple Lumen, Multi Size Balloon with

Revolutionary V-System Exchange Capability for More Precise Balloon Inflation and Efficient Stone Extraction

B

TheReliable,InnovativeEfficient StoneV-SystemExtractionDesignwith the MulLetsi-SizeYouBalloProceedn Design, Th withManufacturedConfidencefrom a Specialand EfficiencyMaterial That Allows for Easier Cannulation,

The V-System is a complete system that integrates Olympus endoscopes and EndoTherapy devices. The revolutionary

V-System design offers the option of guidewire manipulation by the physician or the assistant, allows easier exchange

Multiple balloon sizing

of catheters, and enhances cannulation capability.

The balloon can be inflated to one of three diameters— 8.5mm, 11.5mm, and 15mm. The balloon size can be easily adjustedHookto suit the requirements and conditionsC- of each case so there is

no need to change catheters during

the procedureNow. endoscopists have the option to manipulate guidewires and devices.

The convenient C-Hook allows the device handle to be attached to the endoscope’s control section, putting it within easy reach of the endoscopist. With the device handle right at hand, the endoscopist can maneuver the guidewire, inject contrast media, and manipulate the handle — all while keeping a grip on the scope control section.

V-Marking

Indicates when to raise and lower the V-Groove forceps elevator.

The exclusive V-Marking is located on the proximal side of the sheath. When this marking reaches the channel port on the scope’s control section, it indicates that the device tip has reached the distal end of the scope and the V-Groove forceps elevator may be lowered. When withdrawing the device from the scope, the same marking indicates when to raise the elevator to lock the guidewire.

V-Sheath

Device control by the endoscopist or the assistant.

The V-Sheath allows the endoscopist complete device control or, if preferred,

device control may be given to the assistant. The unique device design allows

Triple-lumen design allows for

the guidewire sheath and injection sheath/handle to be separated. This forked sheatheasydesign passageallows either theofendoscopistthe guidewireor the assistant to control the device.

The guidewire and injection lumens are separated to ensure smoother passage of the guidewire. Additionally,

contrast media can be injected without removing the

guidewire. Two models are available — one with the V-Systeminjection portdevicelocated abovereplacementthe b lloon and the otherprocedure

with the injection port located below the balloon.

Confirm the position of the V-Marking When the V-Marking is completely visible

on the V-System EndoTherapy accessory. above the instrument channel port, lift the forceps elevator to lock the guidewire.

Air Lumen

Injection Lumen

0.035" Guidewire Lumen

The guidewire is now lockedCompletely remove the device.

Easier cannulation

into the V-Groove.

and tapered sheath design

The balloon catheter sheath is manufactured from a special material that allows it for improved insertion into the papilla, ensuring smoother guidewire passage, and facilitating contrast injection. The tapered design

—7 Fr. catheter at the proximal end tapers to 5 Fr. at the distal end — enables an easy approach to the bile duct and accommodates a 0.035" guidewire.