Olympus VN-180 manual Schedule Alarm Playback

2Press any button while the beep tones are being emitted to play back the message set for that time.

Press the STOP button to stop message alarm playback.

The electronic beep tones stop automatically if no button is pressed for 5 minutes after the beeping starts. The message is not played back in this case.

Schedule Alarm Playback

When the Schedule Alarm Playback mode is engaged, the day’s schedule messages can be listened to at a selected time every day.

1	1 First press and hold the MENU/
	FOLDER button for more than 1
	second. Then press the (					)
	button four times to select the [S]
	[ALARM] setting in the Options
	mode. Then, press the MENU/
	FOLDER button again to enter
	the [S] [ALARM] screen.
	2 Pressing the (			) or (	)
2	button alternates ON and OFF.
	Select [ON] by pressing either
	button.
	3 Each time you press the MENU/
	FOLDER button, the “hour” or
	“minute” figures blink. Set the
	“hour” and “minute” you want to
	activate the alarm by pressing
	the (	) or (	) button.
	To complete the folder schedule
	alarm setting, press the STOP
	button.

4At the set alarm time each day, the recorder beeps. Press any button to playback all of the messages recorded for the current date.

Press the STOP button to stop playback.

Message alarm playback occurs every day unless it is set to [OFF].

16