Omega DPS3100, DPS3200 manual Specifications, Manual File omga31320404

SPECIFICATIONS

(Typical @ 25C and rated supply voltage unless otherwise specified)

STANDARD INPUTS

*4-20ma 10-50ma 0-5Vdc 0-10Vdc

*Thermocouple inputs: J,K,T,E,R,S,B

*Cold junction compensation error: +/- 1C (10C to 40C)

*Open input indication: HELP displayed

*Temperature displayable in Degrees C or F

*Non standard inputs available --- consult factory.

ANALOG TO DIGITAL CONVERSION

*4-1/2 Digit (20,000) Count) A/D Converter

*Dual slope integrating converter with 7 conversions /sec. (typical) rate.

SCAN RATE

* Fixed: two channels per second

DISPLAY

*Red seven segment displays--0.39" (10mm) digit height

*Over range indication: HELP

*Display test: Briefly displays 8.8.8.8.8.8.8 on power up.

*Seven digit display

SCALE/OFFSET

*Scale programmable from 1-30000 units

*Offset programmable from 0-99.99 MA (For MA Input)

*Offset programmable from 0-9.999 MV (For Voltage Input)

*Programmable decimal point.

RELIABILITY/ACCURACY

*Calibration: NIST traceable (for thermocouples)

*Temperature resolution: 1C/1F

*Warranty: 1 Year

*Recalibration recommended at 12 month interval

POWER REQUIREMENT
* 120Vac --- 60 HZ	(Standard)
* 240Vac --- 50 HZ	(optional)
* 15VDC	(optional)

OUTPUT (optional)

*Open collector outputs -- 100ma maximum sink, limited to 50ma per output

*Relays: Single pole single throw, 1 Amp @ 28Vdc or 0.5 Amp @ 120Vac resistive *Output termination: Euro-style plug-in connector

Manual File: omga3132_0404

Page 3