Omegaphone® OMA-P1104 User’s Manual
76
Disabling/enabling inputs – If an input is set to detect an alert
condition, it can be disabled to prevent the OMA-P1104 from
dialing out, or re-enabled at any time.
This feature allows the convenience of disabling an input, even
if you are away from the site of the OMA-P1104. One such
application may involve an input programmed to detect
unauthorized entry. You are in another locale, but must allow
someone else temporary access to the area monitored by the
OMA-P1104. Using a Touch ToneTM telephone, you can disable
the appropriate input (thereby disabling any alarm dial-out
response). The input remains disabled until you issue the same
command, which effectively returns it to its former, enabled
state.
Press the following push-buttons on the Touch ToneTM tele-
phone to execute the desired command:
* (asterisk), 1
...equal to Sensor On/Off, for input 1. To re-enable the
input, repeat the same Touch-ToneTM button sequence
used for disabling.
* (asterisk), 2
...equal to Sensor On/Off for input 2, and so on, for
inputs up to 4. To re-enable the input, repeat the same
Touch-ToneTM button sequence used for disabling.
Disabling/enabling High Sound Monitoring –
* (asterisk), 9
...equal to SENSOR ON/OFF for High Sound Alarm
monitoring. To re-enable High Sound Alarm, repeat the
command.
Disabling/enabling AC Power –
* (asterisk), 0
...equal to Sensor On/Off for AC Power monitoring. To
re-enable AC Power monitoring , repeat the command.