Omega Engineering M-4066 manual Logging, IP Addresses

Logging

[Logging] - section name

LogRate - 0: no logging; 1-100000 logging interval in seconds. 5 sec or greater OMWT-SOFT-OPC opens and closes the log file at every logging interval. Less than 5 OMWT-SOFT-OPC leaves the file open until OMWT-SOFT-OPC is terminated or “Server.Logging.LogRate” is set to 0 or 5 and greater.

LogFile - full pathname for the log file - default "OMWT-SOFT- OPC.LOG"

OfflineIndicator - character or string to indicate offline - NULL: last value LogErrors - 1 - log runtime network errors to OMWT-SOFT-OPC.ERR. 0

- do not log errors

IP Addresses

[IP Addresses] – section name (for OMWT-RECIP receivers) IPWaitPort – port number that OWMT-SOFT-OPC will wait for

connections initiated by an IP receiver. (default is 1060) ForwardPort – port number that OWMT-SOFT-OPC will wait for

connections to forward received packets. (default is 0 which means disabled) OWMT-SOFT-OPC will forward received packets through this connection. Each packet has the following format: sensor packet,node number, node description, sensor label. The INI parameter FowardAll in the [Server] section controls what packets get sent.

DIGITAL I/O

[Devicen] - Section name.

Address – serial number of the sensor.

DeviceType - Device type. (DeviceType=DIGITAL)

PollTime - How often to poll the device. (ms)

Label - Name used for the device (and Topic).

Log - Enable/disable logging of device.

OutputOnDemand - Output is initiated on demand or during poll. DescriptionA - General purpose description.

DescriptionB - General purpose description.

OMWT-SOFT-OPC Server OMWT-SOFT-OPC Server .ini File Format N 17