Omega Engineering M-4066 manual Omwt-Ircnt, Owt-Dircnt

DIGCOUNTER and Directional Counter: DIGCOUNTERn and DIRECTCNTn

(OMWT-IRCNT, OWT-DIRCNT)

online(R) - indicates if the device is communicating (0 or 1) polltime(R/W) - how often to poll the device (in milliseconds) nodaladdress (R) – (TCP/IP Receiver). The node address starts at 1. For

TCP/IP Receivers, the node address corresponds to the node number for the TCP/IP connection.

repeateraddress (R) – (Wireless mode) contains the location identifier of the OMWT-REPEAT repeater. If the sensor did not pass through a repeater then the value is 0.

serialno(R) - registration number of the temperature sensor dio.inputa(R) – state of the inputa, 1 or 0 dio.inputb(R) – state of the inputb, 1 or 0 cnt.inputa(R) - current count of dio.inputa

cnt.inputa.diff (R/W)- current count from the time the OMWT-SOFT-OPC was started or when the variable was reset to 0.

cnt.inputa.time(R) - time in milliseconds of last update (uses Win API GetTickCount())

cnt.inputa.scale(R/W) - value multiplied against the counts cnt.inputa.units (R/W)- units description field cnt.inputa.desc(R/W) - general purpose description field cnt.inputb(R) - current count of dio.inputb

cnt.inputb.diff(R) - current count from the time the OMWT-SOFT-OPC was started or when the variable was reset to 0.

cnt.inputb.time(R) - time in milliseconds of last update (uses Win API GetTickCount())

cnt.inputb.scale(R/W) - value multiplied against the counts cnt.inputb.units(R/W) - units description field cnt.inputb.desc(R/W) - general purpose description field

(R) – indicates that the tag is readable.

(R/W) – indicates that the tag is both readable and writeable. OPC Write operations will either change an I/O point at the device, or an operation will be performed.

34 N OMWT-SOFT-OPC Server Tags OMWT-SOFT-OPC Server