1. Introduction
The DAQ-16 is a high speed data acquisition adapter for IBM AT compatible machines
offering eight differential analog input channels with 16-bit resolution, two analog output
channels with 12-bit resolution and four digital input/output li nes. Other features of the
DAQ-16 include:
Analog to Digital Converter
100 KHz maximum sampling rate
Bipolar input ranges of ±2.5, ±5, and ±10 volts
Unipolar input ranges of 0 to +2.5, 0 to +5 and 0 to +10 volts
Selectable gain of 1, 10, and 100
Two DMA channels for continuous acquisition
Internal or external clock and trigger
Digital to Analog Converters
Two independent analog output channels
Output ranges of 0 to +5 volts and ±5 volts
Internal or external voltage reference
Other Features
Interrupt on one of four sources including an external interrupt input
High density D-62 connector for reduced noise
1.1 Installation
1. Configure the DAQ-16 utilizing the instructions in Chapter 2: Circuit Board
Description and Configuration.
2. Ensure that power is not applied to the computer system.
3. Remove the cover according to the instructions provided by the system
manufacturer.
4. Insert the DAC-16 into any vacant ISA expansion slot. The board is secured to the
slot by installing the Option Retaining Bracket (ORB) screw.
5. Replace the system cover per manufacturer instructions.
DAQ-16 Users Manual 8