OM5-IVI

Current Output Modules

FEATURES

●ACCEPTS HIGH LEVEL VOLTAGE OR PROCESS CURRENT INPUT

●UNIPOLAR OR BIPOLAR CURRENT OUTPUT

●1500Vrms TRANSFORMER ISOLATION

●ANSI/IEEE C37.90.1-1989 TRANSIENT PROTECTION

●OUTPUT PROTECTED TO 240VAC CONTINUOUS

●110dB CMR

●400Hz SIGNAL BANDWIDTH

●±0.05% ACCURACY

●±0.02% LINEARITY

●CSA CERTIFIED, FM APPROVED, CE COMPLIANT

●MIX AND MATCH OM5 TYPES ON BACKPANEL

DESCRIPTION

Each OM5-IVI current output module provides a single channel of analog output. The track-and-hold circuit in the input stage can be operated in a hold mode where one DAC can supply many output modules, or a track mode where one DAC is dedicated to each module. In addition to the track- and-hold circuit, each module provides signal buffering, isolation, filtering, and conversion to a high level current output (Figure 1).

Setting of the track or hold mode is controlled by the logic state of WR EN\, module pin 23. When pin 23 is low, the track mode is enabled. If pin 23 is open or high, the hold mode is enabled. The module is designed with a completely isolated computer side circuit which can be floated to ±50V from Power Common, pin 16. This complete isolation means that no connection is required between I/O Common and Power Common for proper operation of the track and hold circuit. For a low state, simply connect pin 23, the Write-Enable pin, to I/O Common, pin 19.

The OM5-BP-16-MUX backpanels allow host computer control of the WR EN\ control line, which allows multiplexing of one host DAC to up to 64 OM5-IVI output modules. During power-up, the output remains at 0mA for 100ms on all models, which allows the track-and-hold circuit to be initialized.

A special circuit in the output stage of the module provides protection against accidental connection of power-line voltages up to 240VAC.

+EXC

+Out

4

4 NC

6

Isolation Barrier

Track

&

Hold

Range Select

18

19

VIN / +IIN

RLOAD

–Out

–EXC

3

2

1

5

3 NC

Surge

Suppression

and

Protection

+V

–V

I/O Common / –IIN

23

WR EN\

Isolated

Computer-Side

Power

Backpanel

Term Block

1

NC

2

NC

Isolated

Field-Side

Power

Power

Oscillator

17

+5V

16

Power Common

FIGURE 1. OM5-IVI Block Diagram.

20

Page 52 Page 54
Page 53
Image 53
Omega Vehicle Security OM5-C manual OM5-IVI, Current Output Modules, Unipolar or Bipolar Current Output
Page 52 Page 54

OM5-C specifications

Introducing the Omega Vehicle Security OM5-C, a cutting-edge vehicle security system designed to provide unparalleled protection against theft and unauthorized access. The OM5-C is engineered for modern vehicles, integrating advanced technologies to safeguard your investment while enhancing convenience and peace of mind.

One of the standout features of the OM5-C is its advanced immobilizer technology. This feature ensures that even if a thief manages to access your vehicle, they will be unable to start the engine without the proper authentication. The OM5-C uses a sophisticated algorithm that communicates with a unique key fob, making it virtually impossible for unauthorized users to bypass the system.

Another significant characteristic of the Omega Vehicle Security OM5-C is its real-time GPS tracking system. Users can remotely monitor their vehicle's location through a dedicated mobile app, which allows for instant alerts if your vehicle is moved without authorization. This not only aids in recovery in the event of theft but also provides peace of mind knowing you can always keep an eye on your vehicle’s whereabouts.

The OM5-C also boasts motion sensors that can detect any unauthorized movement, triggering an alarm to deter potential thieves. In addition, the system features advanced diagnostic capabilities, allowing users to receive notifications about the status of various vehicle components, further ensuring that everything is functioning within normal parameters.

In terms of installation, the Omega Vehicle Security OM5-C is designed for ease and efficiency. It can be installed in a wide variety of vehicles, making it versatile for different types of users. The system is compatible with both standard and luxury vehicles, ensuring comprehensive security solutions for everyone.

The user-friendly interface provided by the OM5-C mobile app allows for easy customization of alerts and settings, allowing users to tailor the system to their specific needs. Users can seamlessly manage alarm settings, track vehicle movements, and even pre-load emergency contacts directly from their smartphones.

Overall, the Omega Vehicle Security OM5-C stands out as a premier choice for vehicle protection, combining innovative technology with user-centric features. This state-of-the-art security system not only defends against theft but also enhances the overall security experience for vehicle owners, making it an invaluable investment for safeguarding automobiles.
Top Page Image Contents