OmniTek 839-1340 Appliance Setup, A. Remove Shipping Materials, B. Top to Rear Vent Conversion

8 Appliance Setup

A. Remove Shipping Materials

Remove shipping materials from inside or underneath the firebox.

B. Top to Rear Vent Conversion

KIT CONTENTS: Rear vent grille.

TOOLS REQUIRED: Power drill; #2 Phillips bit;high-temp silicone sealant (optional.)

Figure 8.3 Remove rear valve cover shield. Remove rear access plate and gasket. Save the screws.

Figure 8.1 Remove top trivet, if installed. Remove vent pipe adapter and gasket. If gasket breaks, apply high-temperature silicone to the bottom of the adapter before installing as indi- cated in Figure 8.6.

CAUTION

Sharp Edges

•Wear protective gloves and safety glasses during installation.

Figure 8.4 Place cover plate and gasket over top vent and attach with the eight screws previously removed.

Figure 8.5 Insert inner collar adapter to rear vent flue.

Figure 8.2 Remove inner collar adapter

Quadra-Fire • Topaz • 7009-113 Rev. J • 12/11 29