Figure 8.6 Install vent pipe adapter with gasket or high-temp silicone to rear vent opening.

Figure 8.9 Slide assembled nuts and bolts into the slots on the legs with the nuts on the bottom.

Figure 8.10 Use a 5/32 in. 4mm) Allen wrench to adjust legs up and down to desired level.

Figure 8.7 Place grille gently into the opening on top of the appliance.

D. Accessories

Install approved accessories per instructions included with accessories. Refer to Section 12 for appropriate accesso- ries.

C. Leg Leveling System

Figure 8.8 Thread Allen bolts through nuts until flush. The Allen bolts and nuts are included in the component pack inside the appliance firebox.

WARNING

Shock or fire risk.

Use ONLY optional accessories approved for this appliance.

Using non-listed accessories voids warranty.

Using non-listed accessories may result in a safety hazard.

Only Hearth & Home Technologies approved accessories may be used safely.

30

Quadra-Fire • Topaz • 7009-113 Rev. J • 12/11

Page 30
Image 30
OmniTek 839-1290, 839-1320, 839-1340 owner manual Accessories, Leg Leveling System