To change the ingress rate of the Port 1, select option 1.
Change Fiber CIR (range 64 to 100000)> 142
To change the ingress rate of the Port 2, select option 6.
Change Port 2 CIR (range 64 to 100000)> 100000
To change the egress rate, select option 4 for Port 1 or option 9 for the Port 2. The egress rates are displayed. Select the desired egress rate.
PI
SA
Bandwidth Control - iConverter 2FXM2 | iConverter, Serial Agent | ||||||
Identifier - |
|
|
|
|
|
|
|
Chassis Number | = 1 |
|
|
|
|
|
|
Slot Number | = 1 |
|
|
|
|
|
|
Model Number | = |
|
|
|
|
| |
|
|
| 1: | 64 Kbps | 11: | 6 Mbps | |
Port 1 | Control |
| 2: | 128 Kbps | 12: | 7 Mbps | |
| 3: | 256 Kbps | 13: | 8 Mbps | |||
1: Ingress CIR |
| 100000 kbps | 4: | 512 Kbps | 14: | 9 Mbps | |
2: Ingress CBS |
| 150 kB | 5: | 768 Kbps | 15: | 10 Mbps | |
3: Excess Traffic Policy | Drop | 6: | 1 | Mbps | 16: | 20 Mbps | |
4: Egress rate |
| 100 Mbps | 7: | 2 | Mbps | 17: | 30 Mbps |
5: Queueing |
| Fair Weight | 8: | 3 | Mbps | 18: | 40 Mbps |
|
|
| 9: | 4 | Mbps | 19: | 50 Mbps |
Port 2 | Control |
| 10: | 5 | Mbps | 20: | 100 Mbps |
|
|
|
|
| |||
6: Ingress CIR |
| 100000 kbps |
|
|
|
|
|
7: Ingress CBS |
| 150 kB |
|
|
|
|
|
8: Excess Traffic Policy | Drop |
|
|
|
|
| |
9: Egress rate |
| 100 Mbps |
|
|
|
|
|
10: Queueing |
| Fair Weight |
|
|
|
|
|
Select Fiber Egress Rate from menu above
4.3.3Layer 2 Control Protocol Filter
Layer 2 Control Protocol Filter provides the ability to discard, forward or tunnel L2CP frames based on the network requirements. Select ‘discard’, ‘forward’ or ‘tunnel’..
The Layer 2 Control Protocol Filter is accessed by selecting option 9 from the Port configuration screen.
PI
SA
L2CP Control - iConverter 2FXM2 | iConverter, Serial Agent | ||
Identifier - |
|
|
|
Chassis Number = 1 | Slot Number = 1 | Model Number = | |
1: Global L2CP Control | Forward |
| |
Enter Choice, Previous Screen(0), (H)elp, E(x)it >
Select the appropriate option to configure the module for the desired operation.
Page 28
