Klinkmann Automation Omron Ethernet DAServer 21
Omron Ethernet DAServer Ver 1.x User Manual Rev 1.3 17014m13
Enter/modify SOCKET parameters.
Host Name (IP Addr.)
Enter the Computer’s Internet Address (IP Address) if it has more than one. If there is
only one Internet Address for computer then you can use default address 0.0.0.0.
Port Number
Enter the UDP Port Number used for communication with OMRON Controllers. The Port
Number must match with Port Number configured in connected OMRON Controllers!
(OMRON Controllers send responses to Port number, configured in PLC, even if request
is received from different Port).
Note: The default port number is 9600.
From the SOCKET branch of the DAServer hierarchy, the CONTROLLER objects can be
created. CONTROLLER represents the logical endpoint to the hardware hierarchy.
To add CONTROLLER to your Omron Ethernet hierarchy
1. Right-click on the SOCKET branch.
2. Select Add CONTROLLER Object from the shortcut menu. It is named
“New_Controller_000” by default.
3. Rename it as appropriate, e.g. to “CS1” as used in following explanation – this new
CONTROLLER object name now will be used in the name of “Parameters” configuration
view.
The “Parameters” configuration view is displayed: