Klinkmann Automation Omron Ethernet DAServer | 32 |
CHAPTER 4
Item Names
The Omron Ethernet DAServer supports item/point names consistent with the point naming conventions used by OMRON PLCs and programming software. The Server supports almost all memory areas of the following OMRON PLC types: CS1, CJ1, C200HX, C200HG, C200HE,
Contents
•Item Name General Format
•OMRON PLC’s Item Naming
•DAServer Standard System Items
•Generic OPC Syntax
Item Name General Format
In this section the general Item naming conventions used by OMRON Ethernet DAServer are explained.
Each Integer, Discrete or Floating Point item generally may be described as:
PnS
Each item, representing bit in word, may be described as:
Pn:b (or Pn:bb or Pn.b or Pn.bb)
Each ASCII string item generally may be described as:
Pn-PhS
where:
n - specifies the Memory area word/bit address of the specific word, flag or bit or
b (bb) - specifies the bit number in word (b can be 0…9 and bb can be 00…15). Number of digits in bit item name with separator is not relevant (leading zeroes are not necessary).
h - Specifies the highest
P - optionally used prefix, one, two or three characters before Memory area address, and designates the type of Memory area.
S - optionally used suffix - a letter after address, which is used to change the default format of data. The following presents the OMRON Ethernet DAServer supported data formats and suffixes, indicating corresponding format.
Unsigned/Signed Format
The server interprets
Omron Ethernet DAServer Ver 1.x User Manual Rev 1.3 | 17014m13 |