3. Using the Unit

The user alternates with each press of the User ID selection

button , as shown below.

User A

User B

Guest

Notes:

If “G” is selected, the measurement results are not stored in the memory.

If the START/STOP button is pressed without selecting a user ID, “G” is displayed and the measurement results are not stored in the memory.

4.Check that you are sitting correctly.

If you are not sitting correctly, the Posture symbol appears on the display. The Posture symbol disappears when you are in the correct posture.

Start measurement only after checking that you are sitting correctly.

Note: Depending on the angle of the arm cuff, the Posture

symbol will appear on the display even if your arm is not in the arm cuff.

EN

Not lit

Angle of arm cuff when sitting correctly.

21

Page 21
Image 21
Omron i-Q142 instruction manual User a User B Guest