2. Preparation

Adjusting the Date and Time Setting

Note: If you need to change the date and time for some reason, adjust the date and time between 10:00 and 18:59. This will avoid problems with morning and evening weekly averages stored in the memory.

1.Press the O/I button to turn the power off.

2.Turn the unit on then press

and hold the Memory button for three seconds or

longer when the standby display (shown right) appears.

Standby display

(When the arm cuff is closed.)

3.The year setting flashes on the display.

Refer to Chapter 2.2 to adjust the settings for the date and time.

EN

15

Page 15
Image 15
Omron i-Q142 instruction manual Adjusting the Date and Time Setting